Aom Shoppy

รายละเอียดของสินค้า Power Over Ethernet Passive POE Injector Splitter Adapter Cable for IP Camera AP - intl

Description:

Easy to install PoE Application for AP, CPE, IP Camera, IP Phone etc.

Use the Power Supply from Powered Device

Accept up to DC 57V Voltage Input

Support up to 40m distance used

Data pin: 1,2,3,6

Power pin: (4+, 5+), (7+, 8-) (0~57V)

This set of simple POE, port line function: 1 /2 3/ 6 transmission data, 4/5+, 7/8- transmission power (can not be used in the POE switch to separate the power)

POE combiner: DC female head: 5.5*2.1mm metal shield screen, line length 18CM, crystal head with protective design

POE separator: DC male head: 5.5*2.1mm metal shield screen, line length 18CM, crystal head with protective design

Transmission rate: 100MBPS

Model: PD3200

Device type: POE allocator

Transmission mode: full / half duplex adaptive

Backplane bandwidth: 1.6 (GB)

Port number: below 8

Number of modular slots: 1

Outline size: 18cm

Feeding current: 1300 (mA)

Colour; white

Specifications:

Easy to install PoE Application for AP, CPE, IP Camera, IP Phone etc.

Use the Power Supply from Powered Device

Accept up to DC 57V Voltage Input

Device type: POE allocator

Transmission mode: full / half duplex adaptive

Outline size: 18cm

Package Included:

1 x PoE Splitter

1 x PoE Injector

Notes:

No need PoE switch, PoE NVR , use the power adapter of the IP camera (DC12V 1~3A).

Up to 40m power supply. Please use Cat.5 or better(pure copper) Ethernet cable(8 pin in need). The better cable, the longer distance for effective used.

Compatible with all IP camera or other 5.5mm/2.1mm power port equipment.